Syslog Server Setup; Table 92 Syslog - ZyXEL Communications Dimension GS-4024 User Manual

GS-4012F/4024 User's Guide
Figure 141 Syslog
The following table describes the labels in this screen.

Table 92 Syslog

LABEL
Syslog
Logging Type
Active
Facility
Apply
Cancel

35.3 Syslog Server Setup

Click Management and then Syslog in the navigation panel to display the Syslog Setup
screen. Click the Syslog Server Setup link to open the following screen. Use this screen to
configure a list of external syslog servers.
232
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog
setting
This column displays the names of the categories of logs that the device can
generate.
Select this option to set the device to generate logs for the corresponding
category.
The log facility allows you to send logs to different files in the syslog server. Refer
to the documentation of your syslog program for more details.
Click Apply to save your changes to the switch's run-time memory. The switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to reset the fields.
Chapter 35 Syslog