ZyXEL Communications Dimension GS-4024 User Manual page 52

Table 5 Navigation Panel Links (continued)
LINK
Switch Setup
IP Setup
Port Setup
Advanced Application
VLAN
Static MAC
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth
Control
Broadcast Storm
Control
Mirroring
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
Port
Authentication
Port Security
Classifier
Policy Rule
Queuing Method
VLAN Stacking
Multicast
IP Application
Static Route
RIP
OSPF
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to a screen where you can set up global switch parameters such
as VLAN type, MAC address learning, IGMP snooping, GARP and priority queues.
This link takes you to a screen where you can configure the IP address, subnet
mask (necessary for switch management) and DNS (domain name server) and set
up to 64 IP routing domains.
This link takes you to screens where you can configure settings for individual switch
ports.
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu).
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the RSTP/MRSTP to
prevent network loops.
This link takes you to screens where you can cap the maximum bandwidth allowed
from specified source(s) to specified destination(s).
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port.
This link takes you to a screen where you can configure the switch to group packets
based on the specified criteria.
This link takes you to a screen where you can configure the switch to perform
special treatment on the grouped packets.
This link takes you to a screen where you can configure queuing with associated
queue weights for each port.
This link takes you to a screen where you can configure VLAN stacking.
This link takes you to a screen where you can configure various multicast features
and create multicast VLANs.
This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
This link takes you to a screen where you can configure the RIP (Routing
Information Protocol) direction and versions.
This link takes you to screens where you can view the OSPF status and configure
OSPF settings.
GS-4012F/4024 User's Guide
51