Table 106 Command Summary: Configuration Mode (continued)
COMMAND
ip
lacp
logins <name>
mac-filter
mac-forward
mirror-port
mrstp
mrstp
multi-login
mvr <vlan-id>
policy <name>
Chapter 42 Introducing Commands
DESCRIPTION
Sets the management IP address
to the default value.
Removes a specified IP static
route <ip>
route.
<mask>
Enables a specified IP static
route <ip>
route.
<mask>
inactive
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
Disables login access to the
specified name.
Enables the specified MAC-filter
name <name>
rule.
mac <mac-addr>
vlan <vlan-id>
drop
<src|dst|both>
inactive
Disables the specified MAC filter
name <name>
rule.
mac <mac-addr>
vlan <vlan-id>
drop
<src|dst|both>
Removes the specified MAC
name <name>
forwarding entry, belonging to a
mac <mac-addr>
VLAN group (if any) forwarded
vlan <vlan-id>
through an interface(s).
interface
<interface-id>
Enables the specified MAC
name <name>
address, belonging to a VLAN
mac <mac-addr>
group (if any) forwarded through
vlan <vlan-id>
an interface(s).
interface
<interface-id>
inactive
Disables port mirroring on the
switch.
Disables the specified STP
<treeIndex>
configuration.
interface
Disables the STP assignment
from the specified port(s).
<port-list>
Disables another administrator
from logging into Telnet or the
CLI.
Disables MVR on the switch.
Deletes the policy. A policy sets
actions for the classified traffic.
Enables a policy.
inactive
GS-4012F/4024 User's Guide
PRIVILEGE
13
13
13
13
14
13
13
13
13
13
13
13
14
13
13
13
273