Interface No Command Examples; No Bandwidth-Limit - ZyXEL Communications Dimension ES-2108 User Manual

33.3 Interface no Command Examples

Similar to the no commands in the Enable and Config modes, the no commands for the
Interface sub mode also disable certain features. In this mode, however, this takes place on a
port by port basis.

33.3.1 no bandwidth-limit

You can disable bandwidth limit on port 1 simply by placing the
bandwidth-limit
Syntax:
no bandwidth-limit ingress
no bandwidth-limit egress
An example is shown next:
• Disable bandwidth limits for incoming traffic on port 1.
sysname(config)# interface port-channel 1
sysname(config-interface)# no bandwidth-limit ingress
Chapter 33 Interface Commands
command.
ES-2108 Series User's Guide
command in front of the
no
237