ZyXEL Communications Dimension GS-4024 User Manual page 281

GS-4012F/4024 User's Guide
Table 106 Command Summary: Configuration Mode (continued)
COMMAND
rip
vrrp network <ip-
address>/<mask-
bits> vr-id <1-7>
uplink-gateway
<ip>
280
DESCRIPTION
Sets the switch to learn RIP
redistribute
routing information which will use
rip metric-
the specified metric information.
type <1|2>
metric <0-
65535>
Sets the switch to learn static
redistribute
routing information which will use
static metric-
the specified metric information.
type <1|2>
metric <0-
65535>
Sets the interface to be passive.
passive-iface
A passive interface does not send
<ip-addr/bits>
or receive OSPF traffic.
Enables and enters the RIP
configuration mode.
Leaves the RIP configuration
exit
mode.
Adds aa new VRRP network nd
enters the VRRP configuration
mode.
Exits from the VRRP command
exit
mode.
Disables the VRRP settings.
inactive
Sets the time interval (in
interval
seconds) between Hello
<1..255>
message transmissions.
Sets a descriptive name of the
name <name
VRRP setting for identification
string>
purposes.
Activates this VRRP.
no inactive
Disables VRRP preemption
no preempt
mode.
Resets the network to use the
no primary-
default primary virtual gateway
virtual-ip
(interface IP address).
Sets the network to use the
no secondary-
default secondary virtual gateway
virtual-ip
(0.0.0.0).
Enables preemption mode.
preempt
Sets the primary VRRP virtual
primary-
gateway IP address.
virtual-ip
<ip>
Sets the priority of the uplink-
priority <1-
gateway.
254>
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
Chapter 42 Introducing Commands