GS-4012F/4024 User's Guide
Table 105 Command Summary: Enable Mode (continued)
COMMAND
disable
enable
erase
running-config
exit
help
history
igmp-flush
kick
tcp <Session
ID>
logout
mac-flush
<port-num>
no
logging
ping
<IP|host-
name>
[vlan <vlan-
id>][..]
reload
config <index>
show
classifier
cluster
262
DESCRIPTION
Restores firmware via TFTP.
flash <ip>
<remote-file>
Exits Enable (or privileged) mode.
Accesses Enable (or privileged)
mode.
Resets to the factory default
settings.
Resets to the factory default
interface port-
settings on a per port basis and
channel <port-
optionally on a per feature
list>
configuration basis.
[bandwidth-
limit...]
Exits Enable (or privileged) mode. 13
Displays help information.
Displays a list of command(s) that
you have previously executed.
Removes all IGMP information.
Disconnects the specified TCP
session.
Exits Enable (or privileged) mode. 13
Clears the MAC address table.
Removes all learned MAC address
on the specified port(s).
Disables syslog logging.
Sends Ping request to an Ethernet
device.
Sends Ping request to an Ethernet
device in the specified VLAN(s).
Restarts the system and use the
specified configuration file.
Displays all classifier related
information.
Displays the specified classifier
[name]
related information.
Displays cluster management
status.
Displays cluster candidate
candidates
information.
Displays the MAC address of the
member
cluster member(s).
Displays the configuration of the
member config
cluster member(s).
Chapter 42 Introducing Commands
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13