Broadcast-Limit; Bandwidth-Limit - ZyXEL Communications Dimension GS-4024 User Manual

GS-4012F/4024 User's Guide
where
<peer|tunnel|discard|
network>
An example is shown next.
• Enable ports 1, 3, 4 and 5 for configuration.
• Set the BPDU control to
and five.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#

45.2.3 broadcast-limit

Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
<pkt/s>
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21

45.2.4 bandwidth-limit

The
bandwidth-limit
312
= Type
peer
Type
tunnel
Type
discard
Type
network
forward a tagged BPDU.
, to forward BPDUs received on ports one, three, four
tunnel
= Enables broadcast storm control limit on the switch.
= Limits how many broadcast packet the interface receives per second.
command enables bandwidth control on the switch.
to process any BPDUs received on these ports.
to forward BPDUs received on these ports.
to drop any BPDUs received on these ports.
to process a BPDU with no VLAN tag and
Chapter 45 Interface Commands