ZyXEL Communications Dimension GS-4024 User Manual page 276

Table 106 Command Summary: Configuration Mode (continued)
COMMAND
snmp-server
spanning-tree
ssh
storm-control
syslog
timesync
trunk
vlan
vlan1q
vlan-stacking
password
Chapter 42 Introducing Commands
DESCRIPTION
Disables sending of SNMP traps
trap-
to a station.
destination
<ip>
Disables STP.
Disables STP on listed ports.
<port-list>
Disables the secure shell server
key
encryption key. Your switch
<rsa1|rsa|dsa>
supports SSH versions 1 and 2
using RSA and DSA
authentication.
Removes the specified remote
known-hosts
hosts from the list of all known
<host-ip>
hosts.
Removes remote known hosts
known-hosts
with the specified public key
<host-ip>
(1024-bit RSA1, RSA or DSA).
[1024|ssh-
rsa|ssh-dsa]
Disables broadcast storm control. 13
Disables syslog logging.
Disables syslog logging to the
server <ip-
specified syslog server.
address>
Enables syslog logging to the
server <ip-
specified syslog server.
address>
inactive
DIsables syslog logging for the
type [type]
specified log type (
config
Disables timeserver settings.
Disables the specified trunk
<T1|T2|T3|T4|T
group.
5|T6>
Removes ports from the specified
<T1|T2|T3|T4|T
trunk group.
5|T6>
interface
<port-list>
Disables LACP in the specified
<T1|T2|T3|T4|T
trunk group.
5|T6> lacp
Deletes the static VLAN entry.
<vlan-id>
Disables GVRP on the switch.
gvrp
Disables port isolation.
port-isolation
Disables VLAN stacking.
Change the password for Enable
mode.
GS-4012F/4024 User's Guide
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
sys , link ,
, error or report ).
13
13
13
13
13
13
13
14
13
275