GS-4012F/4024 User's Guide
Table 106 Command Summary: Configuration Mode (continued)
COMMAND
profile <name>
start-address
<ip> end-address
<ip>
igmp-
snooping
8021p-priority
host-timeout
leave-timeout
unknown-
multicast-frame
<drop|flooding>
reserved-
multicast-group
<drop|flooding>
interface
port-channel
<port-list>
route-domain <ip-
address>/<mask-
bits>
ip
address
name-server
route
lacp
system-priority
loginPrece
<LocalOnly |
dence
LocalRADIUS |
RADIUSOnly>
270
DESCRIPTION
Sets the range of multicast
address(es) in a profile.
Enables IGMP snooping.
Sets the 802.1p priority for
<0-7>
outgoing igmp snooping packets.
Sets the host timeout value.
<1-16711450>
Sets the leave timeout value
<1-16711450>
Sets how to treat traffic from
unknown multicast group.
Sets how to treat traffic belonging
to reserved multicast groups.
Enables a port or a list of ports for
configuration. See
42.11.4 on page 283
details.
Enables a routing domain for
configuration. See
42.11.5 on page 287
details.
Sets the IP address and subnet
<ip> <mask>
mask of the out-of-band
management port.
Sets the default gateway's IP
default-
address for the out-of-band
gateway <ip>
management port.
Sets the IP address of a domain
<ip>
name server.
Creates a static route.
<ip> <mask>
<next-hop-ip>
Sets the metric of a static route or
<ip> <mask>
deactivates a static route.
<next-hop-ip>
[metric
<metric>]
[name <name>]
[inactive]
Enables Link Aggregation Control
Protocol (LACP).
Sets the priority of an active port
<1-65535>
using LACP.
Select which database the switch
should use (first) to authenticate
a user.
PRIVILEGE
13
13
13
13
13
13
13
13
Section
for more
13
Section
for more
13
13
13
13
13
13
13
13
Chapter 42 Introducing Commands