Dhcp Server Configuration Example; Dhcp Relay; Figure 101 Dhcp Server Network Example; Figure 102 Dhcp Server Configuration Example - ZyXEL Communications Dimension GS-4024 User Manual

GS-4012F/4024 User's Guide

30.3.1 DHCP Server Configuration Example

The follow figure shows a network example where the switch is used to assign network
information to the DHCP clients in the RD and Sales network.

Figure 101 DHCP Server Network Example

In the DHCP Server screen, configure two DHCP client IP address pools for the two
networks. The following shows an example.

Figure 102 DHCP Server Configuration Example

30.4 DHCP Relay

Configure DHCP relay on the switch if the DHCP clients and the DHCP server are not in the
same subnet. During the initial IP address leasing, the switch helps to relay network
information (such as the IP address and subnet mask) between a DHCP client and a DHCP
server. Once the DHCP client obtains an IP address and can connect to the network, network
information renewal is done between the DHCP client and the DHCP server without the help
of the switch.
196 Chapter 30 DHCP