ZyXEL Communications Dimension GS-4024 User Manual page 285

GS-4012F/4024 User's Guide
Table 107 interface port-channel Commands (continued)
COMMAND
egress set
<port-list>
exit
flow-control
frame-type
<all|tagged|unt
agged>
ge-spq
gvrp
help
igmp-filtering
igmp-group-
limited
igmp-immediate-
leave
igmp-querier-
mode
<auto|fixed|edg
e>
inactive
ingress-check
intrusion-lock
284
DESCRIPTION
Sets the interface DLF limit in
<pkt/s>
packets per second (pps).
Sets the outgoing traffic port list for
a port-based VLAN.
Exits from the interface port-
channel command mode.
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
Choose to accept both tagged and
untagged incoming frames, just
tagged incoming frames or just
untagged incoming frames on a
port.
Enables strict priority queuing
<q0|q1|...|q7>
starting with the specified queue
and subsequent higher queues on
the Gigabit ports.
Enables this function to permit
VLAN groups beyond the local
switch.
Displays a description of the
interface port-channel commands.
Applies the specified IGMP filtering
profile
profile.
<profile>
Enables the IGMP group limiting
feature.
Sets the maximum number IGMP
number <number>
groups allowed.
Enables the IGMP immediate
leave function.
Sets the IGMP query mode for the
port.
Disables the specified port(s) on
the switch.
Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set.
Enables intrusion lock on the
port(s) and a port cannot be
connected again after you
disconnected the cable.
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
Chapter 42 Introducing Commands