Frame Format; Figure 67 Vlan Stacking; Table 48 Single And Double Tagged 802.11Q Frame Format; Table 49 802.1Q Frame - ZyXEL Communications Dimension GS-4024 User Manual

Hide thumbs Also See for Dimension GS-4024:
Table of Contents

Advertisement

Type is a standard Ethernet type code identifying the frame and indicates that whether the
frame carries IEEE 802.1Q tag information. SP TPID (Service Provider Tag Protocol
Identifier) is the service provider VLAN stacking tag type. Many vendors use 0x8100 or
0x9100.
TPID (Tag Protocol Identifier) is the customer IEEE 802.1Q tag.
• If the VLAN stacking port role is Access Port, then the switch adds the SP TPID tag to
all incoming frames on the service provider's edge devices (1 and 2 in the VLAN stacking
example figure).
• If the VLAN stacking port role is Tunnel Port, then the switch only adds the SP TPID
tag to all incoming frames on the service provider's edge devices (1 and 2 in the VLAN
stacking example figure) that have an SP TPID different to the one configured on the
switch. (If an incoming frame's SP TPID is the same as the one configured on the switch,
then the switch will not add the tag.)
Priority refers to the IEEE 802.1p standard that allows the service provider to prioritize traffic
based on the class of service (CoS) the customer has paid for.
• On the switch, configure priority level of inner IEEE 802.1Q tag in the Port Setup
screen.
• "0" is the lowest priority level and "7" is the highest.
VID is the VLAN ID. SP VID is the VID for the second (service provider's) VLAN tag.

21.3.1 Frame Format

The frame format for an untagged Ethernet frame, a single-tagged 802.1Q frame (customer)
and a "double-tagged" 802.1Q frame (service provider) is shown next.
Configure the fields as circled in the switch VLAN Stacking screen.

Table 48 Single and Double Tagged 802.11Q Frame Format

DA SA SPTPID Priority VID

Table 49 802.1Q Frame

DA
Destination Address
SA
Source Address
(SP)TPID (Service Provider) Tag Protocol IDentifier
VID
VLAN ID
Chapter 21 VLAN Stacking
DA
DA
SA
TPID Priority VID
TPID Priority VID
GS-4012F/4024 User's Guide
SA
Len/Etype Data
FCS Untagged
Len/Etype Data
FCS IEEE 802.1Q
Len/Etype Data
FCS Double-tagged
Priority
802.1p Priority
Len/Etype Length and type of Ethernet frame
Data
Frame data
FCS
Frame Check Sequence
Ethernet frame
customer
tagged frame
frame
149

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-4012f

Table of Contents