GS-4012F/4024 User's Guide
• Use the same configuration file to set all switches (of the same model) in your network to
the same settings.
Note: You may also edit a configuration file using a text editor.
Make sure you use valid commands. The switch rejects configuration files with
invalid or incomplete commands.
42.10.2 Logging Out
In User or Enable mode, enter the
mode entering
logs you out of the CLI.
logout
42.11 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User's Guide for more background
information.
42.11.1 User Mode
The following table describes the commands available for User mode.
Table 104
Command Summary: User Mode
COMMAND
help
logout
exit
history
enable
show
ip
hardware-monitor
<C|F>
system-information
ping
<IP|host-name>
260
exit
takes you out of the Config mode and into Enable mode and entering
exit
DESCRIPTION
Displays help information.
Exits from the CLI.
Logs out from the CLI.
Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
Accesses Enable (or privileged) mode. See
42.11.2 on page
Displays IP related information.
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
Displays general system information.
Sends Ping request to an Ethernet device.
or
command to log out of the CLI. In Config
logout
261.
Chapter 42 Introducing Commands
PRIVILEGE
0
0
0
0
Section
0
0
0
0
0