Mvr Commands; Table 110 Command Summary: Mvr Commands - ZyXEL Communications Dimension GS-4024 User Manual

Table 109 Command Summary: config-vlan Commands (continued)
COMMAND
inactive
ip address
name <name-str>
no
normal <port-
list>
untagged <port-
list>

42.12 mvr Commands

The following table lists the

Table 110 Command Summary: mvr Commands

COMMAND
mvr <vlan-
id>
exit
Chapter 42 Introducing Commands
<ip-address>
<mask>
<ip-address>
<mask> manageable
default-gateway
<ip-address>
fixed <port-list>
forbidden <port-
list>
inactive
ip address <ip-
address> <mask>
ip address
default-gateway
untagged <port-
list>
commands in configuration mode.
mvr
GS-4012F/4024 User's Guide
DESCRIPTION
Disables the specified VLAN.
Sets the IP address of the switch
in the VLAN.
Sets the IP address of the switch
in the VLAN and allow remote
management to this IP address.
Sets the default gateway IP
address in this VLAN.
Specifies a name for
identification purposes.
Sets fixed port(s) to normal
port(s).
Sets forbidden port(s) to normal
port(s).
Enables the specified VLAN.
Deletes the IP address and
subnet mask from this VLAN.
Deletes the default gateway from
this VLAN.
Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN Group
ID.
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
Specifies the port(s) you don't
want to tag all outgoing frames
transmitted with this VLAN Group
ID.
DESCRIPTION
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
Exist from the MVR
configuration mode.
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
PRIVILEGE
13
13
289