GS-4012F/4024 User's Guide
Figure 98 DiffServ: DSCP Setting
The following table describes the labels in this screen.
Table 73 DiffServ: DSCP Setting
LABEL
DESCRIPTION
0 ... 63
This is the DSCP classification identification number.
To set the IEEE802.1p priority mapping, select the priority level from the drop-down list box.
Apply
Click Apply to save your changes to the switch's run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to discard all changes and start configuring the screen again.
192
Chapter 29 Differentiated Services