LABEL
Get Community
Enter the get community, which is the password for the incoming Get- and GetNext- requests
from the management station.
Set Community
Enter the set community, which is the password for incoming Set- requests from the
management station.
Trap: Community
Enter the trap community, which is the password sent with each trap to the SNMP manager.
Trap: Destination
Enter the IP addresses of up to four stations to send your SNMP traps to.
Apply
Click Apply to save your changes back to the switch.
Cancel
Click Cancel to begin configuring this screen afresh.
18.2.4
Setting Up Login Accounts
Up to four people may administer the switch via web configurator at any one time. Configure passwords for each
administrator in the menu.
It is highly recommended that you change the default administrator password ("1234").
Display the Logins screen from the main Access Control screen.
The following table describes the labels in this screen.
Access Control
Table 18-3 Access Control: SNMP
Figure 18-4 Access Control: Logins
Dimension ES-4024 Ethernet Switch
DESCRIPTION
18-5