Figure 128 Access Control: Logins; Table 81 Access Control: Logins - ZyXEL Communications GS-4012F/4024 User Manual

• An administrator is someone who can both view and configure switch changes. The
username for the Administrator is always admin. The default administrator password is
1234.
Note: It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can
view but not configure switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.

Figure 128 Access Control: Logins

The following table describes the labels in this screen.

Table 81 Access Control: Logins

LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
New Password
Retype to confirm Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These people have read-only access.
User Name
Password
Retype to confirm Retype your new system password for confirmation
Apply
Cancel
Chapter 33 Access Control
DESCRIPTION
Type the existing system password (1234 is the default password when
shipped).
Enter your new system password.
Set a user name (up to 30 characters long).
Enter your new system password.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
GS-4012F/4024 User's Guide
210