Bay Networks CLAM Reference Manual page 85

Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
118814-A Rev. A
Enable PPTP
Disabled
Disabled, Enabled
Enables the Nautica router to be the instigator or
terminator of a Point to Point Tunneling Protocol (PPTP)
tunnel.
If this parameter is enabled, then PPTP can also be
enabled in a path. (ISDN Number 1 has to be set to the
IP address of the originator/terminator of the PPTP
tunnel (page 8-11) or as an ISDN Multi Subscriber
Number (MSN) to provide the telephone number of the
PPTP host and IP address of the PPTP Tunnel
terminator.
For more general information on PPTP, refer to the
Concepts section of the Help file as well as the MSN
section of the ISDN chapter on
Blacklist Timeouts
0
A time in seconds
Paths are blacklisted if attempts to reach them fail.
Setting a time here specifies how long a path remains
blacklisted.
When a path is blacklisted, all associated routes are
marked as unreachable. These decay (become outdated
and eventually get deleted). This allows ISDN connected
networks to use alternate routes if they are setup. A path
cannot be used if it is on the blacklist.
Modifying System Settings
page 11-2.
Issue 1
7-7