Bay Networks CLAM Reference Manual page 157

Parameter:
Default:
Options:
Function:
Instructions:
Note:
an IP address here if calls are forwarded to their respective
destinations via another router (a gateway).
Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
118814-A Rev. A
Gateway
(Blank)
A valid IP address
This optional parameter represents the address of the
unit that is acting as a gateway to forward data to its
destination.
Enter into this parameter the valid IP address of the next
hop unit to which data is forwarded for transmission.
The Gateway parameter is an optional field. Only enter
Path
(Blank)
An existing path name
The path over which the network or host can be reached
Enter here a valid (existing) path name over which the
destination host or network (as specified in the IP
Address parameter on
Cost
1
A system generated parameter
Displays the cost as determined by your routing protocol
(refer to "Support",
This parameter is generated by the unit once the route
has been used. It is not to be amended by the user.
TCP/IP Operations
page 12-4) can be reached.
page 8-6)
Issue 1
12-5