Issue 1
Nautica Configuration Wizard Reference Guide
Parameter:
Default:
Options:
Function:
Parameter:
Default:
Options:
Function:
Editing an ISDN Device
To edit the ISDN-TA01 device, the Devices table needs to be
displayed. To display the Devices table, do the following:
1.
2.
3.
To edit the ISDN-TA01 device, do the following:
1.
2.
3.
9-8
•
Always: A data call will always be dropped to make
way for a voice call.
Bump CLI 1
(Blank)
A valid telephone number
Enter a telephone number that can be used with the
Bump Data parameter
data call should be dropped for a voice call.
Bump CLI 2
(Blank)
A valid telephone number
Enter a telephone number that can be used with the
Bump Data parameter
data call should be dropped for a voice call.
In the Nautica Wizard window
that contains the ISDN device you want to edit.
Click on
Advanced > Devices > Devices Configuration
The Devices table
In the Devices table
device.
Click on the Edit button.
The Edit Basic-Rate ISDN window
(page
9-7) to evaluate whether a
(page
9-7) to evaluate whether a
(page
(page
9-2) appears.
(page
9-2), select the ISDN-TA01
(Figure
6-6), select the unit
.
9-4) appears.
118814-A Rev. A