Viewing Filters - Bay Networks CLAM Reference Manual

If IP Filtering is set to NoFiltering, filtering is turned off.
If IP Filtering is set to Reject on Filter Match, any information
received from IP addresses specified in the
Filters
If IP filtering is set to Forward on Filter Match, only information
received from IP addresses specified in
Filters

Viewing Filters

To view existing filters, do the following:
1.
2.
3.
Figure 12-3.
The IP Filter table will list all the filters you have set up on the
Nautica router. Initially this window will be empty.
118814-A Rev. A
parameter will be rejected.
will be forwarded.
Select the unit in the main Nautica Wizard window
6-6) for which you want to view filters.
Click on Advanced > TCP/IP > Filters.
The IP Filter table
IP Filter Table
Advanced > TCP/IP >
Advanced > TCP/IP >
(Figure 12-3) will appear.
Issue 1
TCP/IP Operations
(page
12-7