Multiple Network Adaptors; Figure - Bay Networks CLAM Reference Manual

Issue 1
Nautica Configuration Wizard Reference Guide

Multiple Network Adaptors

If you use the Installation Assistant to set up the Nautica router as
a single host addressing router, you may see the following error
message:

Figure 5-1.

You will not be able to proceed with the installation until this
error is rectified.
1.
2.
3.
5-2
Multiple Network Adaptor Error
Cancel out of the Installation Assistant.
In Windows 95, click on Start > Settings > Control Panel.
The Control Panel window (Figure 5-2) will appear:
118814-A Rev. A