Issue 1
Nautica Configuration Wizard Reference Guide
Parameter:
Default:
Options:
Function:
Instructions:
PAP
If you intend to use Password Authentication Protocol (PAP)
along this path, then you need to set the PAP options for extra
security.
Parameter:
Default:
Options:
Function:
Instructions:
8-24
Profile
Either
Either, PAP, CHAP, BWPAP, BWCHAP, BWEither,
Custom
Select from one of the standard profiles, or a profile you
have designed yourself (Custom) in the PPP section of
Nautica Wizard. (Chapter 10)
The values for this parameter are:
•
Either: Either incoming PAP or CHAP is accepted
on this port.
•
PAP: Only incoming PAP is accepted.
•
CHAP: Only incoming CHAP is accepted.
•
BWPAP: Incoming and outgoing PAP are accepted.
•
BWCHAP: Incoming and outgoing CHAP is
accepted.
•
BWEither: Both incoming and outgoing PAP and
CHAP are accepted.
•
Custom: A pre-designed PPP profile.
For information on designing a custom PPP profile, refer
to Chapter 10.
PAP Passwords
(Blank)
Any valid incoming and/or outgoing password
Sets PAP security
Specifying Password Authentication Protocol (PAP) as
118814-A Rev. A