Figure 15-5. Wan Information - Bay Networks CLAM Reference Manual

Figure 15-4.
This element of the NauticaWatch window displays the same
information as the ISDN Channel 1 element, only the data here
reflects the activity on the second ISDN port.
The destination, number, call type and path type are all displayed
on the left of this part of the screen.
In the centre of the screen are two percentage bars showing the
utilization of the port for transmitted (Tx) and received (Rx) calls.
Four LEDs show if the call is data or voice, and if the port is idle
(as in
If compression has been turned off for the port, the Compression
Off LED will be on; otherwise the compression ratios for
transmitted and received data is displayed.
Finally, a small digital display shows how long the call has been
running.
Figure 15-5.
At the bottom of the NauticaWatch window is the final element of
the screen, the WAN Information element.
118814-A Rev. A
ISDN Channel 2
Figure 15-3) or if there is an error with the port.
WAN Information
Issue 1
Using NauticaWatch
15-5