Bay Networks CLAM Reference Manual page 83

Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
118814-A Rev. A
Enable DHCP Server
Disabled
Disabled, Enabled
Turns the Nautica 200 into a DHCP server.
This parameter works in conjunction with the DHCP
server commands (Chapter 13). For more information on
DHCP, refer to the Concepts section of the Help file.
Enable BOOTP Relay Agent
Disabled
Disabled, Enabled
Enabling this option will forward BOOTP Relay
requests to the server specified in the BOOTP Relay
server IP Address parameter.
If you want the Nautica router to forward BOOTP Relay
requests, then this option must be enabled. The BOOTP
server address must also be specified. For more
information on BOOTP Relay, refer to the Concepts
section of the Help file.
BOOTP Relay Server IP Address
255.255.255.255
The IP address of the BOOTP-Relay server to which
BOOTP requests are sent.
Forwards BOOTP Relay requests to the specified
address
Leaving the default address here will cause the unit to
forward BOOTP Relay requests along those paths you
have set to accept BOOTP Relay
Modifying System Settings
(page 8-7).
Issue 1
7-5