Issue 1
Nautica Configuration Wizard Reference Guide
Adding Filters
To add a new filter, do the following:
1.
2.
3.
4.
Editing Filters
To edit a filter, do the following:
1.
2.
3.
4.
12-8
Select a unit in the Nautica Wizard main window
6-6).
Click on
Advanced > TCP/IP > Filters
In the IP Filter table
button.
The Add/Edit Filter Pairs window will appear
12-4).
Select a unit in the Nautica Wizard main window
6-6).
Click on
Advanced > TCP/IP > Filters
In the IP Filter table
edited and click on the Edit button.
The Add/Edit Filter Pairs window will appear
12-4).
.
(Figure
12-3), click on the Add
.
(Figure
12-3), select the filter to be
(page
(Figure
(page
(Figure
118814-A Rev. A