Ip Routing - Bay Networks CLAM Reference Manual
Network bridge
Hide thumbs
Also See for CLAM:
- Reference manual (106 pages) ,
- Quick start manual (34 pages) ,
- Release note (30 pages)
Table of Contents
Advertisement
Issue 1
Nautica Configuration Wizard Reference Guide
IP Routing
The IP Routing option must be enabled if you wish to use IP
across your Nautica router. The Nautica 200 and Nautica CLAM
IP will only use IP, so leave this parameter enabled.
If you do intend to use IP, you may want to filter information to
and from certain users. IP filtering is set in this part of the
Systems window.
Parameter:
Default:
Options:
Function:
Instructions:
Note:
using IP.
7-8
Leaving this parameter at the default of 0 specifies
exponential blacklisting. Each time a path is re-tried and
fails, the blacklist time is doubled.
Enable
Enabled
Enabled, Disabled
Enables IP routing
If disabled, the Telnet facility is not available and only
local management of the unit via a terminal connected to
the serial port is possible.
The Nautica 200 and Nautica CLAM IP can only route
118814-A Rev. A
Advertisement
Table of Contents
