Bay Networks CLAM Reference Manual page 127

Parameter:
Default:
Options:
Function:
Note:
mean that the unit can no longer send voice calls.
Caution:
not exceed the total channel capacity of the unit (2 for a Nautica
200).
Parameter:
Default:
Options:
Function:
118814-A Rev. A
Outgoing Reservation
0
0, 1, 2
The Nautica 200 has two channels that can be reserved
for outgoing data calls. Specifying 1 or 2 here will
reserve the channels. If the option is left at 0, then all the
channels are used for outgoing data calls as required.
Reserving both channels for outgoing data calls will
The number of incoming and outgoing channels must
Switch Type
Nat.ISDN
Nat.ISDN, AT&T Custom(Multipoint), AT&T
Custom(Point-Point), Nortel DMS
You need only specify a switch type if you are using a
Nautica 200 with a U ISDN interface (North America).
If you are using a U ISDN interface, select the switch
type used by your local telephone company's central
office.
Issue 1
Changing Device Settings
9-13