Issue 1
Nautica Configuration Wizard Reference Guide
Parameter:
Default:
Options:
Function:
Instructions:
Parameters
The parameters here allow you to define exactly how the various
bandwidth parameters are to operate when this path is in use.
Parameter:
Default:
Options:
Function:
Instructions:
Caution:
is set to Permanent.
8-14
Mode (Parameters)
On Demand
On Demand, Permanent
This parameter specifies the operating and backup mode
for the path.
The default value is On Demand, which is used for
switched and leased line circuits only.
Permanent means that a backup call will last as long as
then leased-line circuit is down.
Parameters
The default value for each parameter is 0, which means
the parameter is turned off.
See individual parameter descriptions for the options.
The rest of the parameters on the Bandwidth tab are
those specifically used to define bandwidth on the path.
The parameters for bandwidth are as follows:
•
Min Bandwidth (b/s): Values entered here cause
the device to make extra switched calls until the Min
Bandwidth is met for the path. Multiples of 64000
should be used here for ISDN connection. Only one
end of the path should have the Min Bandwidth set
in order to avoid call collisions.
Only change this parameter from the default if Mode
118814-A Rev. A