Input IP:
192.168.000.001
LCD Panel (LAN 1 IP Address)
Figure 2-22
4. Use the arrow keys as described in
address, then press ENTER. The following message appears
(Figure
Save Change?
Yes, Save !!
Figure 2-23
LCD Panel (Save Change)
5. Press ENTER. The LAN 1 IP address changes and the following
message appears
255.0.0.0.
Input Netmask:
255.000.000.000
LCD Panel (LAN 1 Subnet Mask)
Figure 2-24
6. Use the arrow keys as described in
mask, then press ENTER. The following message appears
(Figure
Save Change?
Yes, Save !!
LCD Panel (Save Change)
Figure 2-25
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 1 subnet mask changes.
8. Record the public LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
Task 7: Configure Management Server Password and Network Addresses
2-23):
(Figure
2-24) with the default subnet mask of
2-25):
Installation Tasks
step 2
to input a new IP
step 2
to input a new subnet
2
2-29