New Threshold Alerts Dialog Box - First Screen - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Figure 2-79 New Threshold Alerts Dialog Box – First Screen
3. Enter a name from one to 64 characters in length. All characters in
the ISO Latin-1 character set, excluding control characters, are
allowed.
4. Select one of the following from the drop-down list under the
Name field:
• Rx Throughput. An alert will occur if the threshold set for
receive throughput is reached.
• Tx Throughput. An alert will occur if the threshold set for
transmit throughput is reached.
• Rx or Tx Throughput. An alert will occur if the threshold set for
either receive or transmit throughput is reached.
5. Click Next.
A new screen appears with additional parameters. The name
configured for the alert appears at the top of the screen.
(Click Previous to return to the previous screen.)
Task 21: Configure Fabric Operating Parameters
Installation Tasks
2
2-97