Configure Public Lan Addresses (Optional); Lcd Panel (Password Entry); Lcd Panel (Lan 2 Subnet Mask); Lcd Panel (Save Change) - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Installation Tasks
2
Configure Public
LAN Addresses
(Optional)
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
2-28
Input Netmask:
255.000.000.000

LCD Panel (LAN 2 Subnet Mask)

Figure 2-19
6. Use the arrow keys as described in
mask, then press ENTER. The following message appears
(Figure
Save Change?
Yes, Save !!
Figure 2-20

LCD Panel (Save Change)

7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server's LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following
Input Password:
0****
Figure 2-21

LCD Panel (Password Entry)

2. Using the
decrement a digit, the
and the
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press ENTER and the following message appears
with the default IP address of 192.168.0.1.
2-20):
(Figure 2-21):
button to increment a digit, the
button to move the cursor left,
button to move the cursor right, input the default or
step 2 to input a new subnet
button to
(Figure 2-22)