Enterprise-Specific Port Status Change Trap2-7; Enterprise-Specific Fru Status Change Trap - McDATA StorageWorks 64 - SAN Director Switch Manual

Enterprise-specific Port Status Change Trap
Binding OIB
1 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3.port_number+1
fcEosPortOpStatus.port_number+1

Enterprise-specific FRU Status Change Trap

Binding OID
1 1.3.6.1.4.1.289.2.1.1.2.2.1.1.3.fru_code.fru_pos
fcEosFruStatus.fru_code.fru_pos
Where fru_code has one of the following values:
0x01, Backplane
0x02, Control Processor card
0x03, Serial Crossbar
0x04, Shasta 32 center fan module
0x05, Fan module
0x06, Power supply module
0x07, Reserved
0x08, Longwave, Single-Mode, LC connector, 1 Gig (Port card)
0x09, Shortwave, Multi-Mode, LC connector, 1 Gig (Port card)
0x0A, Mixed, LC connector, 1 Gig (Port card)
0x0B, SFO pluggable, 1 Gig
0x0C, SFO pluggable, 2 Gig
0x0D, Longwave, Single-Mode, MT-RJ connector, 1 Gig
0x0E , Shortwave, Multi-Mode, MT-RJ connector, 1 Gig
0x0F , Mixed, MT-RJ connector, 1 Gig
0x10 , F-Port, internal, 1 Gig
And where fru_pos is a number specific to each possible FRU
position, which varies from product to product. For example, on a
6140 there are three fans numbered 1 to 3.
This trap is sent for each port which has a status change. There is 1
variable binding as follows:
This trap is sent for each FRU which has a status change. There is 1
variable binding as follows:
McDATA SNMP Support
Value
New status value. See definition for
fcEosPortOpStatus
Values
New status value. See definition for
fcEosFruStatus
E/OS Trap Overview
2
2-7