Task 13: Configure The Switch To The Management Application; Discover Setup Dialog Box - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Task 13: Configure the Switch to the Management Application

Figure 2-51
To manage a new switch, it must be identified to and discovered by
the SAN management application. To identify the new switch:
1. At the SAN management application (SANavigator or EFCM
main window), select the Setup option from the Discover menu.
The Discover Setup dialog box displays

Discover Setup Dialog Box

2. Click Add. The Domain Information dialog box displays with the
IP Address page open by default
Task 13: Configure the Switch to the Management Application
(Figure 2-51).
(Figure 2-52 on page 2-52).
Installation Tasks
2
2-51