Message
Cannot set all ports to 1 Gb/sec due to port speed restriction on
some ports.
Description
Displays if you try to set ports to operate at 1 Gb/sec data speed
through the Configure Ports dialog box and some ports do not support
speed configuration.
Action
Replace ports that do not support speed configuration with those that
do support more than one speed configuration.
Message
Cannot set all ports to 2Gb/sec due to port speed restriction on
some ports.
Description
Displays if you try to set ports to operate at 2 Gb/sec data speed
through the Configure Ports dialog box and some ports do not support
speed configuration (Sphereon 3232 only).
Action
Replace ports that do not support speed configuration with those that
do support more than one speed configuration.
Message
Cannot set all ports to Negotiate due to port speed restriction on
some ports.
Description
Displays if you try to set all ports to Negotiate through the Configure
Ports dialog box and some ports do not support speed configuration
(Sphereon 3232 only).
Action
Replace ports that do not support speed configuration with those that
do support more than one speed configuration.
Message
Cannot set Fibre Channel parameters.
Description
Fibre Channel parameters cannot be set. The link is down or busy.
Action
Retry the operation later. If the condition persists, contact support
personnel.
Message
Cannot set switch date and time.
Sphereon 3032/3232 Element Manager Messages
Messages
A
A-9