Mounting Bracket Installation (Ethernet Hub) - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

B a se
lin e
1 0 /1
0 0 H
u b
S u p
e rS c o m
ta ck 3
® 3

Mounting Bracket Installation (Ethernet Hub)

Figure 2-3
2. Position the first hub in the equipment rack as directed by the
customer. Align screw holes in the mounting brackets with screw
holes in the rack-mount standards.
NOTE: The hub is 1.75 inches, or one rack unit (1U) high.
3. Secure both sides of the hub to the rack-mount standards as
shown in
Allen-head mounting screws (10/32 x 0.5-inch) provided.
Ba se
lin e
10 /10
0 Hu
b
Su pe
rS tac c o m
k 3 3
®
®
Rack Installation (Ethernet Hub)
Figure 2-4
4. Repeat
Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
®
Figure 2-4. Use the 1/8-inch Allen wrench and four
step 1 through step 3 for the second and third hubs.
Installation Tasks
2
2-11