Shut Down Windows Dialog Box; Lcd Panel During Boot Sequence - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Shut Down Windows Dialog Box

Figure 3-50
b. Select the Shut Down option from the list box and click OK. The
EFC Server powers down.
c. Wait approximately 30 seconds and press the power button on
the LCD panel to power on the server and perform POSTs.
During POSTs:
1. The green LCD panel illuminates.
2. The green HDD LED blinks momentarily, and processor
speed and random-access memory information display
momentarily at the LCD panel.
3. After a few seconds, the LCD panel displays the following
message pertaining to boot sequence selection
(Figure
Boot from LAN?
Press <Enter>

LCD Panel During Boot Sequence

Figure 3-51
4. Ignore the message. After ten seconds, the server performs
the boot sequence from BIOS. During the boot sequence, the
server performs additional POSTs and displays the following
operational information at the LCD panel:
•
•
•
3-51):
Host name.
System date and time.
LAN 1 and LAN 2 IP addresses.
MAP 0800: Server Hardware Problem Determination
Diagnostics
3
3-111