Configure Private Lan Addresses; Lcd Panel (Lan 2 Ip Address); Lcd Panel (Save Change) - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Configure Private
LAN Addresses
Figure 2-16
Figure 2-17
Figure 2-18
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server's LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following (Figure
Input Password:
0****
LCD Panel (Password Entry)
2. Using the button to increment a digit, the
decrement a digit, the
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the following message appears
(Figure 2-17) with the default IP address of 10.1.1.1.
Input IP:
010.001.001.001

LCD Panel (LAN 2 IP Address)

4. Use the arrow keys as described in
address, then press ENTER. The following message appears
(Figure 2-18):
Save Change?
Yes, Save !!

LCD Panel (Save Change)

5. Press ENTER. The LAN 2 IP address changes and the following
message appears (Figure
255.0.0.0.
Task 7: Configure Management Server Password and Network Addresses
2-16):
button to move the cursor left,
step 2
2-19) with the default subnet mask of
Installation Tasks
button to
to input a new IP
2
2-27