Remove Zone Members From A Zone; Save The Zone To The Zone Set; Rename A Zone - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Creating and Modifying a Zone
4
Remove Zone
Members from a
Zone
Save the Zone to the
Zone Set

Rename a Zone

EFCM Basic User Manual
4-16
Remove a member from the Pending Zone Members list using the
arrow buttons between the panels. To delete all zone members, select
the Clear button.
NOTE: If you use the arrow button to remove a zone member listed by
WWN or the combination of domain ID and port number, the zone member
is deleted from the Pending Zone Members list. It may not display in the
Attached Nodes list unless the device is attached to the switch.
To save the zone, you add it to the zone set, using the arrow button to
move it from the Zone Name panel to the Zone Set panel. The zone set
is saved when you select the Update button.
To rename a zone, use the following procedure:
1. Select a zone in the Zone Set panel.
2. Use the arrow button to move the zone to the Zone Name panel.
3. Type a new zone name in the Zone Name field. (See the naming
conventions described in
4. Delete the old zone name by selecting the zone on the Zone Set
panel and selecting the Delete button.
5. Add the renamed zone to the zone set using the arrow button to
move it to the Zone Set panel.
on page 4-14.)
Create a New Zone