McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual page 287

Event
Explanation
Code
080 Unauthorized world wide name
081 Invalid attachment.
506 Fibre Channel port failure.
507 Loopback diagnostics port failure.
512 SFP nonfatal error.
514 SFP failure.
581 Implicit incident.
582 Bit-error threshold exceeded.
583 Loss of signal or loss of synchronization.
584 Not operational primitive sequence (NOS) received.
585 Primitive sequence timeout
586 Invalid primitive sequence received for link state.
4
Is fault isolation being performed at the switch?
YES NO
Fault isolation is being performed at the SANpilot interface,
EFC Server, or customer-supplied server. Go to
5
Each port has an amber LED and a blue (2 Gbps operation) or green
(1 Gbps operation) LED adjacent to the port. The amber LED
illuminates and the blue or green LED extinguishes if the port fails.
MAP 0600: Port Failure and Link Incident Analysis
Diagnostics
Action
Go to step 21
Go to step 22.
Go to step 11.
Go to step 12.
Go to step 6.
Go to step 6.
Go to step 34.
Go to step 34.
Go to step 34.
Go to step 34.
Go to step 34.
Go to step 34.
step 7.
3-73
3