Removing Memory; Installing And Removing Hot-Swap Hard Drive; Installing A Hard Disk Drive Into 3.5" Hard Drive Carrier; Figure 39. Installing Memory - Intel H2000WP Series Service Manual

Hardware Installations and Updates

Removing Memory

1. Locate the DIMM sockets. Gently spread the retaining clips at each end of the socket. The
DIMM lifts from the socket.
2. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.

Installing and Removing Hot-swap Hard Drive

Caution: If you don't install all drives, empty drive bays must be occupied by carriers with plastic
drive blank provided to maintain proper system cooling.

Installing a Hard Disk Drive into 3.5" Hard Drive Carrier

1. Remove the four screws securing the HDD interface bracket and install 3.5" HDD with screws
shown in letter A.
Figure 40. Installing Hard Disk Drive – installing 3.5" HDD to carrier
2. With the lever open, insert the hard disk drive assembly into the chassis (see letter A). Push in
the lever to lock it into place (see letter B).
26

Figure 39. Installing Memory

®
Intel Server System H2000WP Family Service Guide