Juniper M7I Hardware Manual page 87

Copyright © 2010, Juniper Networks, Inc.
For more information about the command, see the Junos OS System Basics and Services
Command Reference.
NOTE: The CFEB might continue forwarding traffic for approximately 5
minutes after the request system halt command has been issued.
Press the power switch on each power supply faceplate to the
2.
Shut down power to the router by pressing the power switch for all power supplies to
3.
the off ( ) position. On both AC and DC power supplies, the switch is located on the
O
power supply faceplate.
Chapter 11: Providing Power to the M7i Router
( ) position.
OFF O
61