Providing Power To The M7I Router; Connecting Power To An Ac-Powered M7I Router; Connecting Power To A Dc-Powered Router - Juniper M7I Hardware Manual

CHAPTER 11

Providing Power to the M7i Router

Connecting Power to an AC-Powered M7i Router

Related
Documentation

Connecting Power to a DC-Powered Router

Copyright © 2010, Juniper Networks, Inc.
Connecting Power to an AC-Powered M7i Router on page 57
Connecting Power to a DC-Powered Router on page 57
Powering on the M7i Router on page 59
Powering Off the M7i Router on page 60
To connect power to an AC-powered router:
Locate the power cords shipped with the router, which should have a plug appropriate
1.
for your geographical location (see "M7i Router AC Power, Connection, and Power
Cord Specifications" on page 164).
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
2.
the strap to one of the ESD points on the chassis.
Verify that the switch on each power supply faceplate is in the
3.
For each power supply, insert the appliance coupler end of a power cord into the
4.
appliance inlet on a power supply faceplate and insert the plug into an AC power
source receptacle. Verify that the power cord does not block access to router
components or drape where people could trip on it.
Preventing Electrostatic Discharge Damage to an M7i Router on page 128
Removing an M7i AC Power Cord on page 110
M7i AC Power Electrical Safety Guidelines and Warnings on page 149
M7i AC Power Supply on page 22
M7i Router AC Power Supply Specifications on page 166
Connect DC power to the router by inserting power cables into the field-wiring terminals
on the faceplate of each power supply. Power cables are not supplied with the router.
For information about the required cable type, see .
( ) position.
OFF O
57