Grounding The M7I Router; Connecting The Grounding Cable To The M7I Router - Juniper M7I Hardware Manual

CHAPTER 9

Grounding the M7i Router

Connecting the Grounding Cable to the M7i Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Connecting the Grounding Cable to the M7i Router on page 51
To connect the grounding cable:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Connect the grounding cable to a proper earth ground.
2.
Verify that a licensed electrician has attached the cable lug provided with the router
3.
to the grounding cable.
Make sure that grounding surfaces are clean and brought to a bright finish before
4.
grounding connections are made.
Using a number 2 Phillips screwdriver, remove the screws next to the grounding symbol
5.
above the power supplies on the chassis rear. Secure the grounding cable lug to the
chosen grounding point by reinstalling and tightening the screws.
Verify that the grounding cabling is correct, that the grounding cable does not touch
6.
or block access to router components, and that it does not drape where people could
trip on it.
M7i Chassis Description on page 6
Preventing Electrostatic Discharge Damage to an M7i Router on page 128
M7i Chassis Grounding, Connection, and Cable Specifications on page 167
51