Guidelines For Packing M7I Components For Shipment - Juniper M7I Hardware Manual

M7i Multiservice Edge Router Hardware Guide
Related
Documentation

Guidelines for Packing M7i Components for Shipment

Related
Documentation
194
Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router
8.
to the pallet.
Cover the router with an ESD bag and place the packing foam on top of and around
9.
the router.
Replace the accessory box on top of the packing foam.
10.
Securely tape the box closed or place the crate cover over the router.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
12.
Contacting Customer Support on page 191
Returning a Hardware Component to Juniper Networks, Inc. on page 191
Tools and Parts Required to Remove Components from an M7i Router on page 192
Guidelines for Packing M7i Components for Shipment on page 194
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual boards in electrostatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the router components.
Contacting Customer Support on page 191
Returning a Hardware Component to Juniper Networks, Inc. on page 191
Tools and Parts Required to Remove Components from an M7i Router on page 192
Packing the M7i Router for Shipment on page 193
Copyright © 2010, Juniper Networks, Inc.