Table 19: Ac Power Cord Specifications - Juniper M7I Hardware Manual

Table 19: AC Power Cord Specifications

Country
Australia
Europe (except Italy and United Kingdom)
Italy
North America
United Kingdom
Copyright © 2010, Juniper Networks, Inc.
Appendix D: Power Guidelines, Requirements, and Specifications for the M7i Router
WARNING:
Translation from Japanese: The attached power cable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 19 on page 165 provides specifications and Figure 60 on page 166 depicts the plug
on the AC power cord provided for each country or region.
Electrical Specification
240 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
120 VAC, 60 Hz AC
240 VAC, 50 Hz AC
Plug Type
SAA/3
CEE 7/7
CEI 23-16
NEMA 5-15P
BS89/13
165