Laser And Led Safety Guidelines And Warnings For The M7I Router; General Laser Safety Guidelines For The M7I Router; M7I Laser And Led Safety Warnings - Juniper M7I Hardware Manual

M7i Multiservice Edge Router Hardware Guide
Related
Documentation

Laser and LED Safety Guidelines and Warnings for the M7i Router

Related
Documentation
136
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 125
Maintenance and Operational Safety Warnings for M Series, MX Series, and T Series
Routers on page 139
General Laser Safety Guidelines for the M7i Router on page 136
M7i Laser and LED Safety Warnings on page 136

General Laser Safety Guidelines for the M7i Router

Physical Interface Cards (PICs) with single-mode optical interfaces are equipped with
laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and
Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
When working around PICs, observe the following safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
M7i Laser and LED Safety Warnings on page 136

M7i Laser and LED Safety Warnings

Class 1 Laser Product Warning on page 136
Class 1 LED Product Warning on page 137
Laser Beam Warning on page 137
Radiation from Open Port Apertures Warning on page 138
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Attention Produit laser de classe I.
Warnung Laserprodukt der Klasse 1.
Copyright © 2010, Juniper Networks, Inc.