Table 10: Generic Inventory Of Router Components Installed In The M7I; Table 11: Accessory Box Parts List - Juniper M7I Hardware Manual

Copyright © 2010, Juniper Networks, Inc.
A fully configured router contains the router chassis with installed components, listed in
Table 10 on page 43, and an accessory box, which contains the parts listed in Table 11 on
page 43. The parts shipped with your router can vary depending on the configuration you
ordered.

Table 10: Generic Inventory of Router Components Installed in the M7i

Chassis
Component
PIC
FIC
Routing Engine
Midplane
CFEB or CFEB-E
Fan tray
Power supply
Mounting brackets
Blank panels for slots without components

Table 11: Accessory Box Parts List

Part
Screws, Screw, Pan hd, Phil, 12-24 x 1/2", self-tapping
Screws, Flat Hd, Phil, 5 x 10.5mm Long, 1.6mm Pitch,
self-tapping
Terminal lugs, 16-AWG to 14-AWG, #6 stud, ring terminal,
vinyl insulated
Terminal fork lugs, 14-AWG, #6, 0.25 Wide, insulation
strain relieved, for DC power cables
Terminal lugs, 14-AWG, #8 stud, ring tongue, insulated
Terminal lugs, 14-AWG, two hole for grounding
DB-9 (male) to DB-25 (female) serial adapter
Serial cable, Console, DB9F/DB9F
Chapter 6: Unpacking the M7i Router
Quantity
Up to 4
1 (2-port Fast Ethernet or 1-port Gigabit
Ethernet)
1
1
1
1
1 or 2
2
Depends on router configuration
Quantity
4
4
2
9 (2 per power supply)
2
1
1
1
43