NOTE: This procedure is generic for all the tabs in the Sentinel Control Center. Navigation
procedures for tabs are discussed in the relevant sections.
2.3.6 Changing the Appearance of the Sentinel Control Center
You can change the Sentinel Control Center's look by:
"Setting the Tab Position" on page 49
"Cascading Windows" on page 49
"Tiling Windows" on page 49
"Minimizing Windows" on page 49
"Restoring Windows to Original Size" on page 49
"Closing all Open Windows" on page 49
Setting the Tab Position
1 Click Options > Tab Placement.
2 Select either Top or
Cascading Windows
1 Click Windows > Cascade All. All open windows in the right panel cascade.
Tiling Windows
1 Click Windows > Tile All.
2 Select from the following options:
Tile Best Fit
Tile Vertical
Tile Horizontal
Minimizing Windows
1 Click Windows > Minimize All. All open windows in the right panel minimize.
Restoring Windows to Original Size
1 Click Windows > Restore All. All open windows in the right panel are restored to their original
size.
NOTE: Use the Minimize and Restore options provided on the top right corner of the tab to
minimize individual tabs.
Closing all Open Windows
1 Click Windows > Close All.
.
Bottom
Sentinel Control Center
49