Table of Contents
Advertisement
Rearranging Global Filters
1 In the Global Configuration window, select a filter and click Up or Down to move it to a
different location on the list.
2 Click Save.
Deleting a Global Filter
NOTE: When you delete a global filter, the confirmation message is not displayed.
1 In the Global Configuration window, select a filter from the list and click Delete.
2 Click Save.
10.4.4 Configuring Public and Private Filters
Configuring public and private filters allow you to:
"Adding a Filter" on page 227
"Cloning a Public or Private Filter" on page 229
"Modifying a Public or Private Filter" on page 229
"Viewing the Details of a Public or Private Filter" on page 229
"Deleting a Public or Private Filter" on page 229
Filter Manager Window
Figure 10-5
Adding a Filter
To add a public or private filter:
1 Click Admin > Filter Manager or select File Manager under the Filter Configuration folder in
the Navigator; then click Add.
2 Select an Owner ID. You can select PUBLIC or PRIVATE (user owned).
Administration 227
Advertisement
Table of Contents
